VÖXBURG QUICK START GUIDE

VÖXBURG QUICK START GUIDE

Congratulations on receiving your new VÖXBURG computer! You're just a few steps away from enjoying your favorite games. Our computers are plug-and-play ready, so you won't have to deal with any complicated installation processes. We'll guide you through each step to ensure you can start gaming right away. Please take the time to read this guide carefully or scan our QR code for an easy, step-by-step guide.


VÖXBURG suggests keeping all boxes and packaging, including any inside foam that may have been used. In the uncommon event of a return, it's your responsibility to ensure that the computer, internal components, and products are all packaged securely to prevent any physical damage from occurring during transit.


 Step 1:Connecting your monitor(s),

    Connect your monitor(s) by plugging in your HDMI/DisplayPort Cable(s) into your Graphics Card/Video Card. 

    VÖXBURG recommends using DisplayPort over HDMI for the highest possible refresh rate if your monitor can support a DisplayPort connection.


Step 2: Plug in Peripheral,

    The next step is to plug in your peripherals or accessories into your choice of USB plugs located on the I/O shield of your Motherboard. 


Step 3: Connecting to the Internet,

    Let's get your system connected to the internet! We recommend using an ethernet connection for the fast internet speeds. If you do not have ethernet cable access available please install the Wi-Fi antennas provided in your accessory bag to connect via Wi-Fi. 


Step 4: Connecting your Audio (if available)

    Some headsets or speakers still use the 3.5mm headphone jack which can be found on the motherboard or another 3.5mm headphone jack can be located on the computer case front panel. Some headsets use a USB connection. 


Step 5: Let's Power it Up,

    Locate your 3-prong power supply cable located in your accessory bag, now plug it into the power supply located in the rear. Once you have the cable plugged in make sure the "I" is pushed in to ensure the power supply is on. Now click the power button on your computer case front panel!

Note:

DO not set up your New VÖXBURG computer on carpet or near water; it may cause a static shock.



    • Related Articles

    • A Step-by-Step Guide: How to Install RGB Software

      RGB lighting has become a popular choice for customizing the aesthetics of your computer setup. To control and personalize these vibrant lights, you'll need the right RGB software. Follow these steps to install and set up RGB software seamlessly: ...

    • How to enable secure boot

      How to Enable Secure Boot on Gigabyte Motherboards Ensuring your system is secure is paramount, especially if you are a gaming enthusiast or rely heavily on your PC's performance. One critical security feature is Secure Boot, which helps prevent ...